Qnap, dissaldare e saldare nuova ram?
Dunque, ho un vecchio qnap che attualmente non uso, un ts410..
Al tempo lo cambiai per passare ad un qnap molto più potente, ma ricordo che il limite principale di questo modello, naturalmente sto parlando di un utilizzo base e poco più, è sempre stata la ram.
Ancora non l'ho smontato per il poco tempo, quindi prima di farlo volevo un vostro parere.
La ram è un banco saldato sulla mobo, pensate che dissaldandola e mettendone una più potente la possa vedere?
più che altro, secondo voi è materialmente fattibile o è una perdita di tempo?
Chiaramente lo faccio giusto per curiosità non mi aspetto che cambiando la ram raggiunga i nuovi nas XD..
Comunque di seguito metto le specifiche, mi farebbe piacere un vostro parere:
Citazione:
CPUMarvell 6281 800MHz
DRAM256MB DDRII RAM
Flash Memory16MB
HDD4 x 3.5" or 2.5” SATA I/II HDD
NOTE:
The system is shipped without HDD.
HDD Tray4 x hot-swappable and lockable tray
LAN Port2 x Gigabit RJ-45 Ethernet port
LED IndicatorsStatus, LAN, USB, eSATA, HDD 1, HDD 2, HDD 3, HDD 4
USB4 x USB 2.0 port (Front: 1; Back: 3)
Supports USB printer, disk, pen drive, USB hub, and USB UPS, etc.
eSATA2 x eSATA port (Back)
ButtonsPower button, USB one-touch-backup button, reset button
Alarm BuzzerSystem warning
Form FactorTower
Dimensions177(H) x 180(W) x 235(D) mm
6.97(H) x 7.09(W) x 9.25(D) inch
WeightNet weight: 3 Kg (6.61 lbs)
Gross weight: 4.6 Kg (10.14 lbs)
Sound Level (dB)Without HDD: 33.0dB
Standby: 33.2dB
In operation: 35.1dB
(Background: 25.5dB)
Power Consumption (W)Sleep mode: 12W
In operation: 20W
(with 4 x 500GB HDD installed)
Temperature0~40˚C/ 32~104°F
Humidity5~95% RH, wet bulb:23C
Power SupplyInput: 100-240V AC, 50/60Hz, Output: 12V DC, 10A, 120W
Secure DesignK-Lock security slot for theft prevention
Fan1 x quiet cooling fan (9 cm, 12V DC)